Project Gamma intakes feature a 4 layer reinforced ply silicone with oil resistant lining and aluminum hose connections to improve airflow, increase horsepower, and add style to your engine bay.
Silicone technology allows us to redesign aluminum intakes and provide your engine with increased horsepower and performance. Our intakes are better than the OEM setup in your vehicle in every aspect by featuring a larger internal diameter allowing for increased airflow through their perfectly smooth channel. This presents a higher horsepower, decreased turbo spool time, improved acceleration along with an increase in throttle response. The 4 layer ply silicone adds rigidity to the intake pipe’s overall structure preventing collapsing when used with restrictive filter elements and large turbo applications running extreme amounts of boost.
Project Gamma intakes are the only turbo intakes on the market that features a 3.5” inner diameter. The intake’s flexible material construction allows it to take the shape of the radiator support and all curves without losing its diameter.
Our intakes also feature a CNC aluminum MAF housing that is bonded to the silicone structure allowing for a perfect sensor fitment.
This kit is plug-n-play and DIY friendly with installation that takes about an hour with simple tools and does not require any cutting or further modifications to your vehicle.
This product fits the following BMW models:
- 2014-2020 BMW M2 (Competition only)
- F80/F82/F83/F87 BMW M3 & M4
BMW M3 | M4 | M2C (F80/F82/F83/F87) Charge Pipes with J pipe
Project Gamma silicone charge pipes for the S55 engine are designed to eliminate the restricted airflow from the factory pipes and provide better performance. The highly durable silicone material allows for a very easy install and long lasting use.
The J pipe and inlet couplers feature a CNC aluminum construction to provide perfect fitment and will not fail under pressure. This kit includes all the necessary components and hardware pictured for installation.
This kit fits the following vehicles:
2015+ BMW M3/M4 (F80, F82, F83)
2018+ BMW M2 Competition (F87)
BMW M3 | M4 | M2C (F80/F82/F83/F87) Charge Coolers
Project Gamma charge coolers for the S55 engine feature increased core size and capacity at 60% more than the OEM coolers. Our charge coolers are designed for using 3D scanning to provide perfect and precise fitment. The water connections along with sensor ports are utilized the same way as OEM to allow for the same installation methods.
We offer black or red wrinkle coating for a clean look in the engine bay once installed.
BMW M3 | M4 | M2C (F80/F82/F83/F87) Catless Downpipes
Project Gamma catless downpipes for the S55 engines models feature a 4” construction along with a stainless steel v-band to pipe transition that is machined with CNC to precision. Our downpipes are the best bang for your buck mod available for your S55 engine with gains from 50 horsepower and 60 torque when tuned. Rather than necking down closer to the turbos like most of our competitors, our downpipes present a full 3D design up to the last inches proving a greater increase in flow. Project Gamma catless downpipes are handcrafted to extreme rust resistance using 304 Stainless Steel.
Ceramic coating is offered to reduce temperature in the engine bay.
- Major increases in power throughout the powerband
- Improved turbo and throttle response
- Elimination of turbo lag
- Exotic exhaust note
- Precise and proper fitment using factory heat shielding
Note: This product requires installation by a technician and will need tune recalibration to avoid cel light.
This product fits the following BMW models:
- 2015 - 2018 BMW F80/F82/F83 M3 & M4
- 2018+ BMW F87 M2 Competition (S55 Only)
BMW M3 | M4 (F80/F82/F83) Stainless Steel Mid-pipes
Made specifically for BMW F80 | F82 | F83 | M3 | M4
Project Gamma midpipes for the S55 engine feature a 3.5” construction using high-grade 304 Stainless Steel. Our midpipes will present a different feel for your vehicle improving both its performance and sound.
With the OEM midpipes replaced, your vehicle will be 17lbs lighter along with an increased power of 18HP and 30TQ when tuned. These midpipes will accommodate both your aftermarket and OEM downpipes providing the same precise fitment. Project Gamma midpipes will transform and refresh the driving pleasure of your car.
Project Gamma downpipes for the S55 engine are now offered with a Bootmod3 license. This package is a great way to start running our downpipes smooth and loud. With this bundle, our customers have the opportunity to upgrade the performance of their vehicles and tune them to their preferred specifications at a lower cost. The combination of Project Gamma downpipes and a Bootmod3 license is an excellent upgrade for your S55 engine.
Project Gamma S55 Downpipes
Made specifically for BMW S55 Engine
Project Gamma catless downpipes for the S55 engines models feature a 3” construction along with a stainless steel v-band to pipe transition that is machined with CNC to precision. Our downpipes are the best bang for your buck mod available for your S55 engine with gains from 50 Horsepower and 60 Torque when tuned. Rather than necking down closer to the turbos like most of our competitors, our downpipes present a full 3D design up to the last inches proving a greater increase in flow. Project Gamma catless downpipes are handcrafted to extreme rust resistance using 304 Stainless Steel.
Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.